Framing & Mounting Information

Maxwell Muller works with a 3rd party framing company located in South Florida.

FRAMING DETAILS

  • All frames are a custom black floater frame that is flush with the metal print and has a ¼” separation from the image to the inner edge of the frame, and another ¼” to the outer edge of the frame.

  • Frames include all hanging hardware (a wire, making it quick and easy to hang wherever you need, screws, and level to ensure proper hanging)

MOUNTING DETAILS

  • All Maxwell Muller mounts are designed and produced with a premium frame mount.

  • This premium frame mount has a double-bar structure, ensuring strength and support for your prints.

  • Mounts include all hanging hardware (a wire, making it quick and easy to hang wherever you need, screws, and a level to ensure proper hanging)

HANGING INSTRUCTIONS:

S-

  • Hold print to wall in the desired position

  • Lightly mark pencil on wall at desired height and location

  • Apply screw into your wall

  • Leave screw 1/8" to 1/4" from wall to hang

  • Hang and check with level

M+L-

  • Grab a friend

  • Hold print at desired location and keep it straight using a level

  • Lightly mark pencil on wall at desired height and location

  • Gently place frame against the wall in desired position

  • Before loosening your grip, slowly let the print set on the screws

  • Once you feel the print has secured a position on the nails, you can slowly loosen your grip; but do not let go if you feel one or both sides of the print dropping. If you feel/see the print dropping past the desired position, you will need to take the print off the wall and properly place the wire on the nails